ok amigo a ver si va con el windows media player:spain:
Versión para Imprimir
ok amigo a ver si va con el windows media player:spain:
a ver que es esto
Gracias Lloyd8, vamos a probarlo.
vamos a verlo.
vamos a provarlos gracias
Muchas gracias lloyd8.
salu2
Actualizado DVDFab v7.0.3.0
Cita:
Iniciado por fengtao
Saludos
Actualizado ffdshow v20100411 rev. 3355
Cita:
Notes about latest versions of FFDShow MPEG-4 Video Decoder:
- FFDShow 2010-04-11 (rev. 3355) was compiled by drevil_xxl using GCC 4.1.1 (libavcodec.dll & libmplayer.dll), FFDShow 2010-04-11 (rev. 3356) MMX* was compiled by clsid using ICL9 while FFDShow 2010-04-11 (rev. 3356) SSE** was also compiled by clsid using ICL9.
* Only for CPUs with support for MMX (MultiMedia eXperience) instructions.
** Only for CPUs with support for SSE (Streaming SIMD Extensions) instructions. Check if your CPU has support for SSE or SSE2 instructions using Cpu-Z, a small tool which shows infos about CPU.
First of all, the FFDSHOW consumes way less CPU power than original DivX codecs, even with maximum post-processing. At the same time the post-processing seems to give excellent quality results and allows more configuring than the original DivX codec. It can even automaticly reduce post-processing if your CPU is getting overloaded. The noise filter adds a kind of a rasterising effect to the picture - might be useful in some cases. The alpha version also includes experimental playback for MPEG-1 and MPEG-2 files (such as VCD and SVCD movies), which works pretty damn well. Only problem is that MPEG-2 playback can't play the SVCD clips directly from the CD, but requires the video to be extracted to the HDD by using VCDGear first.
Features of FFDShow MPEG-4 Video Decoder:
- various compression methods:
· MPEG 4 compatible (Xvid, DivX 4, DivX 5, DivX 6, DivX 7) using libavcodec or XviD
· Divx 3 compatible, MSMPEG4v2, MSMPEG4v1
· WMV1/7, WMV2/8
· H263, H263+, H264
· HuffYUV in YV12 colorspace
· MJPEG
· MPEG 1
· MPEG 2, using mpeg2enc code from MJPEGtools project
· MP3, AC3, DTS, E-AC3, AAC
· SVQ3
· Vorbis
· Theora (not for regular use, format isn't stabilized yet)
· all Windows Media Video 9 supported encoders with output to asf/wmv file or AVI
- all common encoding modes: constant bitrate, fixed quantizer, fixed quality, two pass encoding (depends on compressor features)
- for libavcodec and XviD detailed selection of motion estimation method
- minimum and maximum I frames interval
- minimum and maximum quantizer selection, quantizer type and trellis quantization selection for libavcodec
- adaptive quantization (aka. masking) for libavcodec and XviD, single coefficient elimination
- selectable compression of starting and ending credits
- two curve compression algorithms for second pass of two pass encoding - thanks to XviD developers
- second pass simulation: although not very precise, still helpful for tweaking advanced curve compression parameters
- ability to use libavcodec internal two pass code
- image preprocessing with ffdshow image filters (latest ffdshow version must be installed)
- graph during encoding: if your encoding program doesn't provide one
- B frames support: from one to eight consecutive B frames
- support for MPEG 4 quarterpel and GMC
- selectable interlaced encoding
- decompression
Changes from FFDShow rev. 3280 to FFDShow rev. 3305:
- Updated FFmpeg
- DXVA decoder: fixed incorrect frame order when decoding H.264 (regression in rev. 3288)
- Installer: only show ffmpeg-mt option on systems with multiple CPU cores
- DXVA: it's now possible to disconnect a renderer from the output pin and connect a different renderer, without having to initialize ffdshow DXVA decoder.
+ fixed DXVA 1.0 API violation
+ Added MakeAll.bat - batch build of all the necessary GCC DLLs
- HD audio : added special behavior for xonar users
- Reverted revision 3290 : gives green picture. DXVA crash with bluray subs still needs to be fixed
- Updated ICL project files
- Bluray/DVD subs crash fix with YV12 colorspace (used by DXVA) by Tal Aloni. Next step : updating sw_scale outdated code of ffmpeg
- Forgot to comment personal settings for installer
- Several DVD and Bluray subtitles fixes. Cosmetics & languages updated
- HD audio bitstream : regression fix on revision 3278
- Regression fixed from rev 3276 : DVD menus and subtitles
- Regression fixed on 3276 : crashing on DVD menus
- Bluray subs fixes : YUV colorspaces now supported (existing code was buggy).
Also added support to MKV with bluray subs but subtype is null (which is a bug). To be tested.
- Forgot to remove a debug trace which would cause perf drawbacks
Important Note:
- Some antivirus software -like AVG- may "detect" a trojan in FFDShow builds. This is a false positive, there are no trojans in FFDShow builds!
Saludos
Actualizado K-Lite Codec Pack Full v5.9.0
Cita:
Version 5.9.0 Full ~ 14.8 MB ~ April 16th 2010
Changelog:
- Updated Media Player Classic Home Cinema to version 1.3.1774.0
- Updated ffdshow to revision 3361
- Updated Haali Media Splitter to version 1.10.120.15
- Updated Codec Tweak Tool to version 4.3.0
- Updated MediaInfo Lite to version 0.7.31
- Updated Win7DSFilterTweaker to version 3.1
- Changed default video renderer in MPC-HC from "EVR Sync" to "EVR Custom Presenter" on Windows Vista/7
- The audio stream switcher in ffdshow is now enabled by default
- The Gabest MPEG splitter is now used by default for M2TS files
- Minor changes
Saludos
Actualizado QuickTime Alternative v3.2.2
Cita:
Changelog of QuickTime Alternative 3.2.2 and QT Lite 3.2.2:
- Updated QuickTime codecs to 7.66.71.0
- Updated QuickTime ActiveX control to 7.66.71.0
- Updated QuickTime Browser plugin to 7.66.71.0
- Enabled support for embedded mp4 and m4a files
- Fixed the configuration option at the end of the installation
- Added a warning when the option to install Apple Application Support is unchecked
- Added a warning when an incompatible version of Apple Application Support is detected
Saludos
Actualizado Satsuki Decoder Pack v4.3.0.5
Cita:
2010/05/09
Satsuki Decoder Pack 4.3.0.5
Changelog :
- Removed realmedia video filters, now decoded by ffdshow.
- Added mediainfo to display video files properties in MPC.
- Added auto-detection of installation of .net framework 3, if installed, EVr renderer is used by default.
Updaded:
- MPC-HC (1.3.1809)
- FFdshow (1.0.7.3373)
- Gabest filters (1.3.1809):
- FLVSplitter
- Mpeg2DecFilter
- MpegSplitter
- VSFilter
- RealMediaSplitter
Saludos
Actualizado DVDFab v7.0.6.0
Cita:
Iniciado por fengtao
Saludos
buen aporte gracias
quiero verlo,graciasCita:
Iniciado por lloyd8 [Only registered and activated users can see links. [Los usuarios sin registrar no pueden ver los enlaces click AQUI para registrarte]]
Actualizado K-Lite Codec Pack Full v6.0.0
SaludosCita:
Version 6.0.0 Full ~ 15.6 MB ~ May 27th 2010
Changelog:
- Updated Media Player Classic Home Cinema to version 1.3.1959
- Updated ffdshow to revision 3461
- Updated Cyberlink MPEG-2 decoder to version 8.4.0.1408
- Updated DivX H.264 decoder to version 1.2.1 (build 9.0.1.21)
- Removed Gabest MPEG-2 decoder
- Added VP8 decoder
- Updated Haali Media Splitter to version 1.10.175.0
- Removed DirectVobSub 2.33. Use the Mega pack if you need this old version.
- Updated Codec Tweak Tool to version 4.4.0
- Updated MediaInfo Lite to version 0.7.33
- Updated Win7DSFilterTweaker to version 3.2
- ffdshow is now used by default for decoding Vorbis audio instead of CoreVorbis
- Added playback support for Google's new .webm video file format
- Minor changes
Notes:
- If you get a RegSvr32 error during installation, then click on Ignore. Install [Only registered and activated users can see links. [Los usuarios sin registrar no pueden ver los enlaces click AQUI para registrarte]] and then run the codec pack installer again. This issue will be fixed in next version.
Before you download:
[Only registered and activated users can see links. [Los usuarios sin registrar no pueden ver los enlaces click AQUI para registrarte]]
Gracias, por el aporte.
Actualizado K-Lite Codec Pack Full v6.2.0
SaludosCita:
Version 6.2.0 Full ~ 14.4 MB ~ July 14th 2010
Changelog:
- Updated Media Player Classic Home Cinema to version 1.3.2121
- Updated ffdshow to revision 3512
- Updated VP8 decoder to version 0.9.9.0
- Removed DivX H.264 decoder
- Updated MediaInfo Lite to version 0.7.34
- Updated Codec Tweak Tool to version 4.4.5
- Changed default H.264 decoder to ffdshow
gracias lo probaremos.
saludos.
muchas gracias
lo quiero gracias...
gracias lo veremos
Actualizado K-Lite Codec Pack Full v6.4.0
SaludosCita:
Version 6.4.0 Full ~ 14.5 MB ~ September 15th 2010
Changelog:
- Updated Media Player Classic Home Cinema to version 1.4.2543
- Updated ffdshow to revision 3574
- Updated madFLAC to version 1.9
- Updated Haali Media Splitter to version 1.10.262.12
- Updated Codec Tweak Tool to version 4.5.0
- Updated Win7DSFilterTweaker to version 3.6
- Updated MediaInfo Lite to version 0.7.35
- Minor changes
Actualizado Satsuki Decoder Pack v4.3.0.7
Cita:
2010/10/02
Satsuki Decoder Pack 4.3.0.7 (32 and 64 bits)
Changed :
- Changed default video renderer to VMR-9 n windows xp to avoid sync bug with some ATI drivers.
Updated:
- Updated MadVr 0.32 (32bit version only)
- Updated ffdshow 3608
- Updated MPC 1.4.2260
- Updated gabest filters 1.4.2260
- Updated haali splitter 1.10.262
Saludos
Actualizado DVDFab v8.0.2.2
Cita:
Iniciado por fengtao
Saludos
Actualizado imgburn v.2.5.2.0
SaludosCita:
2.5.2.0 Released: Wednesday 1st September 2010
- Added: Built in support for 'ATAPI iHBS' drives for the auto booktype/advanced settins stuff.
- Added: Option within the installer to manipulate the registry key / GPO to do with allowing access to drives within a remote session.
- Added: New icons in Vista / 7 style (rather than the now 'dated' XP look).
- Added: Workaround for a firmware bug in the 'Read Track Information' command on the Asus DVD-E616P (FW: 1.04) drive.
- Added: An 'ImgBurn' icon at the 'All Programs' top level within the start menu (Only Windows Vista+).
- Added: Support for reading the layer break position from the image file descriptor within a Nero (NRG) image file.
- Added: Options that allow the user to override which info should be used to create the program's internal disc layout info. (1 = TOC, 2 = Disc/Track Info, 3 = Disc Capacity (Basic single session/track!)) Buggy firmware on certain drives may benefit from using TOC info for DVD media rather than the now default Disc/Track Info.
- Added: Option to allow non compliant file/folder creation dates in the UDF file system (only applies to UDF 2.00+). Normally, the creation date must be before the modified/accessed date and it's 'tweaked' so that's always true. (I take the 'Modified' date to be the most important of the 3 as that's what's displayed in Explorer)
- Added: Workaround for LiteOn/Samsung drives that report an incorrect 'Logical Track Size' for DVD-R/DVD-RW discs where the track size is 1 sector over being divisible (exactly) by 16.
- Added: Ability to read the layer break position (put in by Rimage software) from a special field in the ISO9660 PVD.
- Added: You can now opt to have the Explorer/Disc panes side by side (rather than stacked) in the Disc Layout Editor window.
- Added: When device enumeration of 'Auto Loaders' is enabled, you can now choose which types to search for (Acronova / Primera Technology).
- Added: Option where you can configure the PreGap detection command order (1 = Read CD, 2 = Read SubChannel, 3 = Read CDDA).
- Added: Support for Primera Technology auto-loaders.
- Added: 'Underburning' option to the 'Warnings' group within the Settings. This will allow you to configure if the program should tell you that you can burn to a single layer disc and don't need to use the double layer disc in the drive.
- Added/Changed: The program now warns you (by means of a log entry) if loading a project or queue file failed. (i.e. for 'Advanced' mode, if a file/folder mentioned in the IBB no longer exists)
- Added/Changed: One extra method of generating and suggesting a volume name in Build mode when the user hasn't entered one themselves.
- Added/Changed: Lots of error handling code to hopefully enable better (more useful) error reports from Eurekalog/madExcept.
- Changed: When loading the settings from an ini file (via the /SETTINGS CLI parameter), the program will attempt to load the settings from the registry if the ini file doesn't exist (rather than just using the defaults).
- Changed: The 'Close' -> 'Track' tool now closes the last track on the disc (as reported by the disc information command) rather than being fixed on track 1.
- Changed: When the GUI font is set to 'Segoe UI', the program now uses size 9 rather than size 8 ([Only registered and activated users can see links. [Los usuarios sin registrar no pueden ver los enlaces click AQUI para registrarte]]).
- Changed: Switched to using madExcept for catching errors and sending logs instead of Eurekalog. (Just testing something out!)
- Changed: Updated to latest revision of the Explorer Treeview/Listview components used in the DLE window of Advanced Build mode.
- Changed: Using FastMM v4.92 memory manager again (like in 2.5.0.0) rather than the Borland/CodeGear default one (like in 2.5.1.0). Newer versions of FastMM have given odd access violations during the beta cycle so sticking with 4.92 for now.
- Changed: The DLE window now works on / remembers percentages rather than actual sizes for the explorer pane and folder treeviews - so they can be applied directly when switching from stacked to side by side view and vice versa.
- Changed: The installer wipes out the file splitting settings (due to new values being added to the list) - should have done this in 2.5.1.0 but I forgot.
- Changed: Handling of DirectShow errors so that if anything fails when 0 bytes have been processed, you no longer have the option to call that the end of the file and continue.
- Changed: Moved the running of the Toolbar checker program (checks to see if the toolbar should be offered at all) to before the installer GUI loads - so now there's no pause between pages.
- Changed: Re-wrote the installer so the Ask Toolbar gets installed along with the rest of the files (if it's selected of course!) and not the second you click the 'Next/Install' button on the toolbar offer page. (No freeze when clicking 'Next' and looks nicer)
- Changed: Now using the 'MainFormOnTaskbar' option (when running Vista+) so you can interact with the program properly via the taskbar. There are z-order issues with doing this but you'll just have to live with them!
- Changed: Uniblue desktop (internet) shortcuts are now more obvious within the installer and are deselected by default. You can also pick to have just 1 of them if you so wish rather it being all or nothing.
- Changed: Uniblue links within the program itself are totally gone. (Everything is back to normal - phew!)
- Changed/Fixed: The keyboard shortcuts for switching modes and showing/hidings certain windows now use Shift+Ctrl+? instead of Ctrl+Alt+?. The Ctrl+Alt+? ones prevented certain letters from working on non-English setups.
- Changed/Fixed: The installer creates the uninstall.exe earlier on now so that it exists before the 'Uninstall' shortcut gets created - fixes an issue where the shortcut doesn't have the correct icon under Windows 7.
- Changed/Fixed: The user can now select if 'BiDiMode' should be 'Left To Right' / 'Right To Left'.
- Fixed: An internal table containing file system info during a Read/Verify operation was using an incorrect start LBA value for files when UDF 2.50+ was being used. (Only used when logging which file a certain bad sector belongs to)
- Fixed: 'Soft link' (Symbolic link) files were added to Build mode compilations with a size of 0 rather than the size of the file they linked to.
- Fixed: The 'Include Reparse Point Files' option wasn't working in 'Standard' build mode.
- Fixed: Potential infinite loop when an error occurs re-enabling media control notification (MCN).
- Fixed: Workaround for a Borland/CodeGear/Embarcadero bug in the TComoboBoxEx component regarding the size of the drop down list, the ItemHeight and the DropDownCount.
- Fixed: The 'Write Queue' window would open partially hidden behind the taskbar if it was aligned at the top of the screen.
- Fixed: Bug where an extra trailing backslash ('\') would be added to a BDAV/BDMV folder name when the program automatically created one as part of adding a 'known' BD Video file to the compilation.
- Fixed: Wasn't removing the file association 'OpenWithProgids' registry values when uninstalling.
- Fixed: Invalid info in 'Write Speed Miscompare' warnings in the log if the write speed is set to 'MAX' and the commands used to set the write speed fail (i.e. due to DMA issues).
- Fixed: Taskbar button text swapping between 0% and x% when formatting a disc at the start of a DVD-RW burn when the Incremental write type is being used.
- Fixed: Reading a couple of track information flags (NWA_V and LRA_V) from the wrong byte in the information data (Doh!).
- Fixed: Bug in the DLE window where if you bring up the context menu on a certain item and then delete it, if you press the Delete key again you'll get an Access Violation.
- Fixed: Explorer treeview/listview on DLE window were forcing 'Black' as the text colour for the first column.
- Fixed: Mouse wheel scrolling bug in the Explorer style combobox component within the 'Disc Layout Editor' window.
- Fixed: Couldn't set 'Delete Incomplete Files' (Settings -> Events) to 'No'.
- Fixed: (Hopefully) an issue where a thread could be created after they're all supposed to have been destroyed and this then causes an access violation.
- Fixed: Bug that could prevent the new (in v2.5.1.0) MCN/ISRC subchannel scanning code from running.
- Fixed: Cancelling any of the prompts about building such and such a disc (or anything before 'Operation Started' goes into the log) wouldn't actually abort a build operation.
- Fixed: Potential access violation when performing a drag+drop operation and setting the drop description.
- Fixed: Potential access violation when parsing APE tags.
- Fixed: Potential access violation when connecting directshow filters fails.
- Fixed: Issues with pure ISO9660 images and file/folder names using double byte characters based on the system locale.
- Fixed: Issue in the Explorer style component (from MustangPeak) that caused a 'No Disk' type of error to pop up when selecting 'My Computer' in the treeview on the left.
- Fixed: Access violation when detecting regional code of DVD Video files if an IFO was missing from the set.
- Fixed: Potential 'Divide By Zero' error as a result of another error which caused a thread runtime exception.
- Fixed: Potential infinite loop problem (due to odd drive response) when analysing track PreGaps.
gracas compañero.
Veamos pues...
Saludos.
muchas graciass:spain::spain:
gracias compi
vamos a verlo
Gracias socio
me hace falta un repr
muchisimas gracias colega
vamos a verlo gracias........
sl2........................
Actualizado K-Lite Codec Pack Full v6.9.0
SaludosCita:
Version 6.9.0 Full ~ 14.1 MB ~ January 28th 2011
Changelog:
- Updated Media Player Classic Home Cinema to version 1.4.1.2834
- Updated ffdshow to revision 3750
- Updated DC-Bass Source to version 1.3.0
- Updated Codec Tweak Tool to version 4.7.3
- Updated MediaInfo Lite to version 0.7.41
- Minor changes
me gustaria probarlo
garcias de antamano
Buenas tardes:
Me hacen falta algunos codecs de audio para reproducción de dvds, así que probare estos a ver que tal me va.
GraciaS
Actualizado K-Lite Codec Pack Full v7.1.0
SaludosCita:
Version 7.1.0 Full ~ 14.0 MB ~ April 4th 2011
Changelog:
- Updated ffdshow to revision 3800
- Updated Haali Media Splitter to version 1.11.96.14
- Updated Xvid to version 1.3.1
- Updated Lagarith to version 1.3.23
- Updated Codec Tweak Tool to version 4.9.2
- Updated Win7DSFilterTweaker to version 4.1
- Updated MediaInfo to version 0.7.43
Actualizado Satsuki Decoder Pack v4.3.0.12
SaludosCita:
2011/05/06
Satsuki Decoder Pack 4.3.0.12 (32 and 64 bits)
Updated:
- FFdshow 3827
- MPC-HC 1.52.3052
- Gabest Filter 1.52.3052
- MadVR version 0.61 (32 bits only)
Corrected a reboot bug on some windows xp configs
Actualizado codec Xvid v1.3.2 stable release
SaludosCita:
Xvid 1.3.2 stable release
This is Xvid 1.3.2 bugfix release. It fixes and replaces the previous 1.3.1 stable release.
Changes since 1.3.1:
xvidcore library
- Updated implementation of IDCT/FDCT to match error spec of MMX/SSE code
- Added "make info" to unix Makefile
- Removed debian directory from release tarballs
- Made multi-threading (pthread support) switchable at compile time
VFW frontend
- Minor GUI changes
DShow/MFT frontend
- GUI cosmetics
- Updated MSVC project files with seperate build configs for MFT-enabled binary
You can read a more detailed description of the changes in the ChangeLog file available in the top directory of the inflated sources tarball.
Actualizado VLC v1.1.9
SaludosCita:
VLC 1.1.9
2011-04-12
VideoLAN and the VLC development team present VLC 1.1.9, a minor release of the 1.1 branch.
This release, not long after 1.1.8, was necessary because some security issues were found, and the VLC development team cares about security.
This release also brings updated translations and a lot of small Mac OS X fixes.
Source and binaries builds for Windows and Mac are available.
See the [Only registered and activated users can see links. [Los usuarios sin registrar no pueden ver los enlaces click AQUI para registrarte]] for more information on 1.1.9.
Actualizado BSPlayer v2.57.1051
SaludosCita:
BSPlayer 2.57.1051
ADDED
* new osd mode
* option to set subtitles off by default, subtitles are still loaded but not shown
* option to ignore SSA styles
* option to set background color for full screen mode
* support for some Windows 7 features
FIXED
* unicode file names were in some cases displayed with short name
* fixed wrong language checking with online subtitles
* with online subtitles only default language will now be requested
* fixed always on top bug when returning from full screen mode when sepearate taskbar buttons were enabled
* text inside {} in SSA subtitles will now be ignored
* changed/fixed mkv default audio stream handling
* all online subtitle providers will now be checked at the same time in separate threads
Actualizado Media Player Classic HomeCinema v1.5.2.3167
SaludosCita:
Changes (3159-3167):
- Fix: Some OSD messages were not translatable;
- Updated Ukrainian translation by arestarh1986;
- Added an OSD message when taking a screenshot. This commit fixes ticket #1382;
- Fix: MPEGSplitter, some fix in PMT parser.
Actualizado IrfanView v4.28
SaludosCita:
There were numerous changes here are only the more important things.
Version 4.28 ( - CURRENT VERSION - ) (Release date: 2010-12-16)
Option to support IrfanView by installing Google Chrome browser (OPTIONAL !)
New multipage images feature: Show page thumbnails (Hotkey: F10, menu: View)
(Uses thumbnail settings from Thumbnails window, use TAB for focus change)
New multipage images option: Change pages using Page keys (Properties->Browsing)
New color management option in Properties->Viewing:
Set input ICC profile file for images without embedded ICC profile (default: sRGB)
New edit menu: Show selection grid (None, Golden Ratio, Thirds)
New edit menu: Redo (one step, hotkey: CTRL + J)
Video Playbar showed if DirectShow option used (Fullscreen: B = toggle playbar)
(see Hotkeys help page; Thanks to Henner Helmers for testing)
Option to show an image color channel, menu: "Image->Show channel" and
Option show the channel as color or grayscale (Properties->Browsing/Editing)
Selection: hold CTRL key pressed during drawing to make a proportional selection
with the ratio from "Create Custom selection" dialog
New selection hotkeys:
ALT + arrows: change width/height of the selection rectangle
CTRL + arrows: proportional resize of the selection rectangle
Arrows: If no scrollbars visible: Move selection rectangle
New placeholder options for: $D, $d, $F and $N => allow partial text, example:
$N[0-5] => get first 5 characters from the file name
New window display options: Fit to window width/height
New Email PlugIn option: Resize large images
(Advanced options work on the first page only)
New Batch resize option: Resize based only on new/old DPI value
Vertical and horizontal flip can be applied on selections
New print dialog option: Collate (for multiple copies of multipage images)
New Insert-Text dialog options: Antialiased text and Centered (batch mode)
New Sort dialog option: Insert before selected file (for Batch/Slideshow)
New JPG-Transform PlugIn option: Write/remove JFIF JPG header
New Capture dialog feature: Set timer value as decimal number
New hotkey: click into image + SHIFT = copy hex color value to clipboard
New thumbnail sizes for 3:2, 4:3 and 16:9 ratios (Thumbnail window options)
New selection color/method for items in Thumbnails window
Improved extraction of video frames (more formats supported if Codecs installed)
New feature for advanced users: define an external editor for every extension
=> see FAQs for an example, [CustomEditors]
New PNG save option: Save transparency as Alpha channel (Thanks to Thomas Henlich)
Command line: /advancedbatch and /convert can process all pages from multipage TIF
Command line: /extract works now for GIF/ANI animations too
New command line option: /export_pal=palfile (export palette to a PAL file)
New hotkey: SHIFT + F5 = Refresh (force resample, if set in display options)
New hotkey: SHIFT + Home/End = Load first/last page in a multipage image
New hotkey: CTRL + D = Image->Add border/frame
New hotkey: CTRL + SHIFT + X = Set as wallpaper: Proportional
Menu change: Create max. custom selection moved to "Create maximized selection"
At request of Luratech: removed support of LWF/LDF formats
(projects/formats stopped, buffer overflows reported) Several PlugIns are changed/updated, please install the newest versions
[Only registered and activated users can see links. [Los usuarios sin registrar no pueden ver los enlaces click AQUI para registrarte]]
Actualizado KMPlayer v3.0.0.1440
SaludosCita:
3.0.0.1440 - (22 de abril de 2011)
- Añadido el formato WMA al AlbumArt
- Actualización codecs de audio BASE 2.4.6.0 (añadido soporte para archivos OFR)
Bugs corregidos:
- Problemas al saltar de posición en archivos FLV
- No se escucha el audio FLAC de 24 bits
- Problema con el tamaño de la imagen
- Algunos problemas de sincronización audio-vídeo
- Fallos corregidos en el render EVR:
-- Diversos cuelgues
-- No se ve la imagen al activar la aceleración en tarjetas ATI
-- La imagen no tiene suficiente contraste
- Problemas con el codec EAC3
- No se reconocen las pistas de audio TrueHD
- No se leen correctamente las etiquetas ID3V2 de los archivos MP3
- Fallos en el render EVR C/A
- Análisis de archivos MP4 mejorado
- Carga de archivos mejorada
- El codec interno de audio siempre está activo (LPCM, PCM)
Actualizado ImgBurn v2.5.5.0
SaludosCita:
2.5.5.0 Released: Thursday 13th January 2011
- Added: Support for Plextor PX-870 / PX-880 / PX-L890 drives to be treated as LiteOn drives (rather than true Plextor drives) by the 'Book Type' / 'Advanced Settings' code. This negates the need to manually enter the Device IDs in the 'Configure Drive OEM' window.
- Added: Support for /NOSAVELOG command line switch (see ReadMe.txt for usage).
- Added: Support for /FILESYSTEMONLY command line switch (see ReadMe.txt for usage).
- Added: Support for relative paths when reading the boot image file name from an IBB file.
- Added: Proper support for CDI images (including multi-track/session ones) via Padus's PfcToc.dll file (must be present where ImgBurn.exe is).
- Changed: Show a little more firmware version information for LG drives on the Device Capabilities window and when checking for firmware updates. This is useful for drives like the BH10LS30 that display 1.00 when the full version number might actually be 1.00-A9.
- Changed: Increased precision of timestamps when 'building' UDF file system.
- Changed/Fixed: DLL loading method to avoid Microsoft Security Advisory (2269637).
- Fixed: An internal table containing file system info during a Read/Verify operation was using an incorrect size value for files when UDF was being used and the files had multiple allocation descriptors spread over multiple sectors. (Only used when logging which file a certain bad sector belongs to)
Buena recopilación de codecs, gracias.
Ultimamente me suenan las peliculas gangosas, tengo instalado el K-Lite Codec Pack 3.9.0 full, no se si se habra corrompido, y no se de donde bajarme otra vez ese pack o otro mejor, por favor me podeis ayudar, gracias.
He visto el K-Lite 7.1.0 full que posiblemente me valga, desinstalando antes el otro, pero soy un INUTIL que no sabe donde tengo que pinchar para bajarmelo, por favor lloyd8 por enesima vez hechame una mano. Gracias
salu2
Te dejo el enlace pinceles : [Only registered and activated users can see links. [Los usuarios sin registrar no pueden ver los enlaces click AQUI para registrarte]]
Muchas gracias Platon, todo solucionado.Cita:
Iniciado por Platon [Only registered and activated users can see links. [Los usuarios sin registrar no pueden ver los enlaces click AQUI para registrarte]]
salu2:msn-wink: